lots of bit for my 80q!

Coxy · 13-12-12, 07:32 PM

handbrake cables
rear wishbone bushes(early)
n/s/r track control arm
later type(b3) gear selector rod, need the part that is on the underside of car, not the part inside

radiator hoses, (type 89 )
2x 5/8 to 3/4 adaptors for heater hoses.

type 89 propshaft

o/s gutter moulding
number plate light

K Simmonds · 13-12-12, 07:53 PM

I've got a couple of decent complete prop's, I want to keep one as a spare for my S2 but the other is going spare. Not sure what it would cost to send though due to length, drop me a PM if your interested.

Audi Derek · 13-12-12, 09:12 PM

Bushes.

Got mine from here.

http://www.powerflexshop.com/car/aud...-1973-1996?p=2

..

Audi Derek · 13-12-12, 09:14 PM

And 034 do silicone hose upgrade kits..

..

4v6 · 13-12-12, 10:06 PM

They the same handbrake cables as the urq Al?

I have a brand new pair to fit an urq, cant remember what i paid for em now......

RetroAuto · 14-12-12, 08:49 AM

Quote:

Originally Posted by K Simmonds

I've got a couple of decent complete prop's, I want to keep one as a spare for my S2 but the other is going spare. Not sure what it would cost to send though due to length, drop me a PM if your interested.

Hi Kit, I am doing a bit of restoration on my old mate's Alvis, he lives at Yatton, nr Leominster,

If you want to do another meet in Leominster one Evening, I'll get Coxy to stump-up some fuel money

still be cheaper than a courier.

Brian83 · 14-12-12, 09:41 AM

PSH are pretty good, they made some bespoke hoses for my dyno installation, do some off-the shelf bits for 20VT here

http://www.performancesiliconehoses.com/audi-41-c.asp

I might have an old OE spare top hose for cars without aux rad if that will do?

A_N_Other · 14-12-12, 10:51 PM

Quote:

Originally Posted by 4v6

They the same handbrake cables as the urq Al?

I have a brand new pair to fit an urq, cant remember what i paid for em now......

I think the saloon ones are longer - and saloon quattro are special (and nla at GSF or Euro car parts...)
Had to use a new 2WD saloon cable one side and recon the other side when my handbrake failed the MOT last year.... but looks like mine were non standard bodge anyhow (previous owner probably found the same problem!)
Not looking forward to fixing it next time....

13-12-12, 09:12 PM	#3
Audi Derek “Been raced and rallied” Classic Audi Club Member Join Date: May 2008 Location: Bridgwater Somerset Posts: 1,431	Bushes. Got mine from here. http://www.powerflexshop.com/car/aud...-1973-1996?p=2 .. __________________ Vorspurng durch Technik (see it does work)

13-12-12, 09:14 PM	#4
Audi Derek “Been raced and rallied” Classic Audi Club Member Join Date: May 2008 Location: Bridgwater Somerset Posts: 1,431	And 034 do silicone hose upgrade kits.. .. __________________ Vorspurng durch Technik (see it does work)

13-12-12, 07:53 PM	#2
K Simmonds Senior Member Classic Audi Club Member Join Date: Dec 2009 Location: Mid Wales Posts: 1,060	I've got a couple of decent complete prop's, I want to keep one as a spare for my S2 but the other is going spare. Not sure what it would cost to send though due to length, drop me a PM if your interested.

13-12-12, 10:06 PM	#5
4v6 Ex Member Classic Audi Club Member Join Date: Dec 2007 Posts: 5,565	They the same handbrake cables as the urq Al? I have a brand new pair to fit an urq, cant remember what i paid for em now......

14-12-12, 09:41 AM	#7
Brian83 Grown up member Classic Audi Club Member Join Date: Jul 2011 Location: Loughborough & Lincoln Posts: 662	PSH are pretty good, they made some bespoke hoses for my dyno installation, do some off-the shelf bits for 20VT here http://www.performancesiliconehoses.com/audi-41-c.asp I might have an old OE spare top hose for cars without aux rad if that will do?