Headlining removal - Page 2

mikes2 · 02-11-21, 02:26 PM

It's usually the little pull handles at the sides that stick or break when you try to release them. They are fragile so be careful

youngjim · 02-11-21, 08:43 PM

Yeah I broke one of mine but at least it's out

youngjim · 12-11-21, 09:31 PM

I used these glass lifters to allow me to force up the rear off the sunroof using plywood sheets to prevent damage etc with a length of timber. This allowed me to get release agent in where needed and aid things along.

youngjim · 12-11-21, 09:33 PM

If you can get this height without breaking anything, you could then try and tap the carriage forward gently to break the corrosion grip as in this next pic, if you understand my meaning?

02-11-21, 02:26 PM	#11
mikes2 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Polmont Posts: 2,617	It's usually the little pull handles at the sides that stick or break when you try to release them. They are fragile so be careful __________________ 1991 90 quattro 20v sport 1991 90 quattro

12-11-21, 09:33 PM	#14
youngjim Grown up member Join Date: Aug 2010 Location: N.Ireland Posts: 25	If you can get this height without breaking anything, you could then try and tap the carriage forward gently to break the corrosion grip as in this next pic, if you understand my meaning? Last edited by youngjim; 12-11-21 at 09:36 PM.

02-11-21, 08:43 PM	#12
youngjim Grown up member Join Date: Aug 2010 Location: N.Ireland Posts: 25	Yeah I broke one of mine but at least it's out

12-11-21, 09:31 PM	#13
youngjim Grown up member Join Date: Aug 2010 Location: N.Ireland Posts: 25	I used these glass lifters to allow me to force up the rear off the sunroof using plywood sheets to prevent damage etc with a length of timber. This allowed me to get release agent in where needed and aid things along.