Probably been asked before: Fuel line clamps/rubbers

Cynical26 · 12-11-21, 04:05 PM

Hi all,

I've tried searching for replacement rubbers that fit in the clamps on the underside of the car to support the fuel lines.

Part No. 895201245

Had no joy really. Is there a UK supplier for these that people are using? Mine are mainly missing and the clamps are a bit bent etc.

Thanks

P.S. I also searched the part No. here before posting but nothing came up, either that or its so long since I've posted anything the Forum engine took the huff

John. · 12-11-21, 07:37 PM

I'd think they're the same whether it's an S2 or a 1.6, 2nd hand might be the answer.

tractor Dave · 12-11-21, 08:46 PM

What car is it for?
I have a few S2 spares.

Cynical26 · 13-11-21, 09:43 AM

Hi John, yeah I’m sure they will be the same across most of the range.

It is for my ‘93 coupe 2.3 NG

Sent from my iPhone using Tapatalk

tractor Dave · 13-11-21, 11:21 AM

Send me a PM
I have a few spare and I'm sure they are the same.

84CoupeGT · 16-11-21, 10:08 PM

Seems to be a couple of options on eBay, are these the same?

https://www.ebay.co.uk/itm/Gol-f-GRO...-127635-2958-0

https://www.ebay.co.uk/itm/AUDI-UR-Q...-127635-2958-0

Edit... Just realised they look different - sorry. You could try HP Autoparts, they're on Facebook, based in Germany but they speak English and seem to be able to get hold of stuff that's not available here. Looks like Audi Tradition have them, so even if HP don't stock them, maybe they could order them for you and ship them over..

tractor Dave · 17-11-21, 07:39 AM

I've found a few and will be posting this morning.

Colin Aitchison · 17-11-21, 09:40 PM

https://www.heritagepartscentre.com/...mountings.html

Copy and paste above into address bar £3.95 inc vat + postage

mikes2 · 17-11-21, 10:44 PM

895 201 245 for the cars with 3 lines.

I got some A4 ones which are all one part - clamp and rubber combined.

8D0 201 190 A - these have the hole for the clamp in the middle. If you drop the A, there's another version but the hole is off to one side.

Getting the old clamps off is a challenge - you more or less need to destroy them

Cynical26 · 19-11-21, 05:27 PM

Thanks everyone,

Dave sent me three with clamps and rubber retainers that are almost as good as new.

Quote:

Originally Posted by mikes2

Getting the old clamps off is a challenge - you more or less need to destroy them

I'll not lie, this is the bit I am not looking forward too. At least now I have everything (I think) I will need. New fuel pump, filter, 8mm kunifer pipe and flexible fuel pipe and clamps.

I will hopefully get a start on this before the end of the month.

If I'm cutting and connecting the fuel pipes on the underside of the car, before the engine bay, will 7.5m roll of kunifer be enough?

13-11-21, 09:43 AM	#4
Cynical26 Grown up member Join Date: Dec 2016 Location: North Ayrshire Posts: 735	Probably been asked before: Fuel line clamps/rubbers Hi John, yeah I’m sure they will be the same across most of the range. It is for my ‘93 coupe 2.3 NG Sent from my iPhone using Tapatalk

16-11-21, 10:08 PM	#6
84CoupeGT Grown up member Join Date: Nov 2020 Posts: 309	Seems to be a couple of options on eBay, are these the same? https://www.ebay.co.uk/itm/Gol-f-GRO...-127635-2958-0 https://www.ebay.co.uk/itm/AUDI-UR-Q...-127635-2958-0 Edit... Just realised they look different - sorry. You could try HP Autoparts, they're on Facebook, based in Germany but they speak English and seem to be able to get hold of stuff that's not available here. Looks like Audi Tradition have them, so even if HP don't stock them, maybe they could order them for you and ship them over.. Last edited by 84CoupeGT; 16-11-21 at 10:30 PM.

17-11-21, 10:44 PM	#9
mikes2 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Polmont Posts: 2,617	895 201 245 for the cars with 3 lines. I got some A4 ones which are all one part - clamp and rubber combined. 8D0 201 190 A - these have the hole for the clamp in the middle. If you drop the A, there's another version but the hole is off to one side. Getting the old clamps off is a challenge - you more or less need to destroy them __________________ 1991 90 quattro 20v sport 1991 90 quattro

12-11-21, 07:37 PM	#2
John. 4 ring whore! Classic Audi Club Member Join Date: Mar 2011 Location: Scottish Borders. Posts: 7,540	I'd think they're the same whether it's an S2 or a 1.6, 2nd hand might be the answer.

12-11-21, 08:46 PM	#3
tractor Dave Senior Member Classic Audi Club Member Join Date: Apr 2018 Location: Wales Posts: 1,174	What car is it for? I have a few S2 spares.

13-11-21, 11:21 AM	#5
tractor Dave Senior Member Classic Audi Club Member Join Date: Apr 2018 Location: Wales Posts: 1,174	Send me a PM I have a few spare and I'm sure they are the same.

17-11-21, 07:39 AM	#7
tractor Dave Senior Member Classic Audi Club Member Join Date: Apr 2018 Location: Wales Posts: 1,174	I've found a few and will be posting this morning.

17-11-21, 09:40 PM	#8
Colin Aitchison Senior Member Classic Audi Club Member Join Date: Dec 2013 Location: Back home in Tillicoultry Posts: 1,343	https://www.heritagepartscentre.com/...mountings.html Copy and paste above into address bar £3.95 inc vat + postage