S2 Coupe strut brace???

swiggett · 15-02-10, 12:19 PM

Hi
I have been informed that a genuine S2 coupe strut brace will fit a ur quattro coupe turbo ?

If this is correct would anyone have the Part Number so my local Audi dealer can look it up to see if it is still available.

Yours Hopefully
Simon

amanda · 15-02-10, 12:23 PM

I believe so I did have the part numbers to hand but someone has moved them

swiggett · 15-02-10, 12:32 PM

Hi Amanda
Would be good if you could find the part number for the strut brace, my ur quattro has been breathed on by Dyrlinx about 9000 miles ago and a strut brace would finish off nicely.

Best Regards
Simon

amanda · 15-02-10, 12:45 PM

Ok bar is 8a0805645a and you will also need8a0805635b x1, 8a0805636b x1, 8a0805963 x2,893412375a x2 and 171201969 x4

swiggett · 15-02-10, 01:22 PM

Many thanks for the part numbers for the strut brace, so i presume it must be true that a S2 brace will fit a ur quattro turbo, would be interesting to hear if anyone on the forum has ever fitted one, or am I going to be a guinea pig ?

Andy10v · 15-02-10, 01:30 PM

This should be some help, all part numbers and some pictures.

http://www.humanspeakers.com/audi/strut-brace-90.htm

amanda · 15-02-10, 01:34 PM

Quote:

Originally Posted by swiggett

or am I going to be a guinea pig ?

You and me both then

BIGGYIN · 15-02-10, 02:29 PM

What material would you say bar- 8A0 805 645 A 34.95,is made of?
Could you make your own?

peanut · 15-02-10, 03:50 PM

Quote:

Originally Posted by BIGGYIN

What material would you say bar- 8A0 805 645 A 34.95,is made of?
Could you make your own?

yes very easily, its just a square tube bar. Im sure ive got one knocking around here somewhere, will need to check. If ive got it you can have it with those ahem...other bits Karl

Puglife · 15-02-10, 04:24 PM

Judging by photos i've seen its 20mm Box section with prob 2mm wall. £7-8 for 2metres from metal stockists....

15-02-10, 12:23 PM	#2
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	I believe so I did have the part numbers to hand but someone has moved them __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

15-02-10, 12:32 PM	#3
swiggett Grown up member Join Date: Dec 2009 Posts: 83	general chat Hi Amanda Would be good if you could find the part number for the strut brace, my ur quattro has been breathed on by Dyrlinx about 9000 miles ago and a strut brace would finish off nicely. Best Regards Simon

15-02-10, 12:45 PM	#4
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Ok bar is 8a0805645a and you will also need8a0805635b x1, 8a0805636b x1, 8a0805963 x2,893412375a x2 and 171201969 x4 __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

15-02-10, 01:22 PM	#5
swiggett Grown up member Join Date: Dec 2009 Posts: 83	general chat Many thanks for the part numbers for the strut brace, so i presume it must be true that a S2 brace will fit a ur quattro turbo, would be interesting to hear if anyone on the forum has ever fitted one, or am I going to be a guinea pig ?

15-02-10, 01:30 PM	#6
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	This should be some help, all part numbers and some pictures. http://www.humanspeakers.com/audi/strut-brace-90.htm __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

15-02-10, 02:29 PM	#8
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	What material would you say bar- 8A0 805 645 A 34.95,is made of? Could you make your own?

15-02-10, 04:24 PM	#10
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	Judging by photos i've seen its 20mm Box section with prob 2mm wall. £7-8 for 2metres from metal stockists.... __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.