7a 20v injector upgrade kit

8690q · 21-12-12, 10:45 PM

Hi,

I'm looking to replace the old Hitachi injectors in my 20v with a set of upgraded injectors and adapters.

After christmas I was going to try and hunt a set down from 034 but thought it might be worth asking if anyone has them kicking about doing nothing, long shot I know.

Thanks

Michael

Andy10v · 21-12-12, 11:34 PM

You can also buy adapters and source your own injectors, no idea what you can get injectors for?

£28+pp for adapters
http://www.ebay.co.uk/itm/Audi-90-Qu...item4abf47274c

034 are £217 plus postage just now.
http://www.034motorsport.com/fuel-in...ved-p-329.html

adapters only from 034 are £95 +p&p

Some part numbers and flow rates for some of the various injectors that have been used in the kits over the years.

20vcqdriver · 22-12-12, 01:20 PM

I can give you a contact e-mail to Patrick Carlier who designed this kit originally if interested, sure his prices will be a lot less than 034

Gib · 22-12-12, 01:54 PM

What is Patrick up to these days? i presume its lots of mad cap ideas stripping 20v and then modifing them using the most unlikey parts. Did he ever sort out the autocheck running man idea?

8690q · 22-12-12, 10:31 PM

Nice one Andrew, is there an easy/cheap injector option to go with those adapters ?

Thanks Dave, Does patrick still do/source bits for the kits ?

Andy10v · 22-12-12, 10:39 PM

Sorry, forgot the link to the injector info (they have supplied different injectors over the years (apparently with different cc)

http://www.motorgeek.com/viewtopic.php?f=16&t=50102

Nuno Cristiano on S2 forum has replied to your thread anyway.

8690q · 22-12-12, 11:01 PM

Thanks again Andrew,

I've just replied on s2 forum post.

20vcqdriver · 24-12-12, 07:44 AM

Quote:

Originally Posted by Gib

What is Patrick up to these days? i presume its lots of mad cap ideas stripping 20v and then modifing them using the most unlikey parts. Did he ever sort out the autocheck running man idea?

He's busy sorting his Ur at the moment and hopefully designing a short shift kit for the same car that will then fit mine too

ALso started a factory look LPG kit for the 20vt that might be worth a look if he gets it running...

21-12-12, 11:34 PM	#2
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	You can also buy adapters and source your own injectors, no idea what you can get injectors for? £28+pp for adapters http://www.ebay.co.uk/itm/Audi-90-Qu...item4abf47274c 034 are £217 plus postage just now. http://www.034motorsport.com/fuel-in...ved-p-329.html adapters only from 034 are £95 +p&p Some part numbers and flow rates for some of the various injectors that have been used in the kits over the years. __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

22-12-12, 01:20 PM	#3
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	I can give you a contact e-mail to Patrick Carlier who designed this kit originally if interested, sure his prices will be a lot less than 034 __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-

22-12-12, 10:39 PM	#6
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	Sorry, forgot the link to the injector info (they have supplied different injectors over the years (apparently with different cc) http://www.motorgeek.com/viewtopic.php?f=16&t=50102 Nuno Cristiano on S2 forum has replied to your thread anyway. __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

22-12-12, 01:54 PM	#4
Gib Grown up member Join Date: Jul 2007 Location: Abingdon in a boat about 15 foot above the roof of my house Posts: 221	What is Patrick up to these days? i presume its lots of mad cap ideas stripping 20v and then modifing them using the most unlikey parts. Did he ever sort out the autocheck running man idea?

22-12-12, 10:31 PM	#5
8690q Grown up member Classic Audi Club Member Join Date: Jun 2009 Location: Coalsnaughton Posts: 190	Nice one Andrew, is there an easy/cheap injector option to go with those adapters ? Thanks Dave, Does patrick still do/source bits for the kits ?

22-12-12, 11:01 PM	#7
8690q Grown up member Classic Audi Club Member Join Date: Jun 2009 Location: Coalsnaughton Posts: 190	Thanks again Andrew, I've just replied on s2 forum post.