Dropping fault codes

Bandycoot · 17-11-16, 10:11 PM

Whats the best way of dropping the fault codes on my b3 90? I've got a Ross tech interface from when I had an S8 and I wanted to use an adapter but speaking to Ross tech it's not compatible.

Sandro · 17-11-16, 10:26 PM

Probably fuse method

http://www.sjmautotechnik.com/troubl...g/100ecuf.html

mikes2 · 18-11-16, 07:55 AM

the later 4 plug ecu version works with vcds.

Bandycoot · 18-11-16, 01:05 PM

Apparently, as my diagnostic plugs are three wire and not four, the adaptor for my interface won't work. That's according to the boffins at Ross tech.

Bandycoot · 18-11-16, 01:39 PM

Apparently, as my diagnostic plugs are three wire and not four, the adaptor for my interface won't work. That's according to the boffins at Ross tech.

18-11-16, 07:55 AM	#3
mikes2 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Polmont Posts: 2,617	the later 4 plug ecu version works with vcds. __________________ 1991 90 quattro 20v sport 1991 90 quattro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17-11-16, 10:26 PM	#2
Sandro Grown up member Join Date: Feb 2011 Location: Chelmsford Posts: 651	Probably fuse method http://www.sjmautotechnik.com/troubl...g/100ecuf.html

18-11-16, 01:05 PM	#4
Bandycoot Grown up member Join Date: May 2015 Posts: 24	Apparently, as my diagnostic plugs are three wire and not four, the adaptor for my interface won't work. That's according to the boffins at Ross tech.

18-11-16, 01:39 PM	#5
Bandycoot Grown up member Join Date: May 2015 Posts: 24	Apparently, as my diagnostic plugs are three wire and not four, the adaptor for my interface won't work. That's according to the boffins at Ross tech.