I am reassembling a 1985 Audi Coupe GT 1994cc. This car has been off the road for seven years. The photographs show the part I require. It is the plastic retaining clip which fits through 8 elongated holes in the lower window aperture in the door thus retaining the outer window slot seal then going through the slot to retain the lower steel strip on the outside of the door. I need 10 of these plastic clips to get both doors in working order.
Does anyone know if these are readily available, as they may be used on other models, or where i could get some.
Unable to take a photo. as each time i tried I exceeded The physical size restriction or he capacity restriction in M Bytes. Nevertheless the part required is about 18mm in length and 9mm in width (max) together with a raised piece to secure behind the elongated hole in the door. Hope this helps someone identify it.
