Ok so I started this new thread cause the other thread was in the intro section. Looking for more help and thought I'd find it here in the tech section. After plugging and the port on the intakes manifold the car did start but ran like shit. Tries again a few days later and the car seems to NOT want to crank. It moves them does not turn over. So hoping these pics will help. And thanks real MSH for the tips. Will look into in the morning.
Breather setup. Runs from block to valve cover then over to the runner intake boot.
This is the open port on the intake manifold. It's on the back end.
I'm also missing the n75 valve. Or changeover valve? Can I use one from a 20v with no problems?
Found this today. It's on the back of the airbox and its open.
And what's the open hole on the fuel distributor