Quote:
Originally Posted by lampost1
I have exactly the same problem. Been to a garage and it works when it feels like it. Any progress on your own?
|
Yes I have since fixed mine it happened to be the silver lock at the side of the door, where the rods push and pull levers up and down they had worn and eventually popped out inside. After removing the door card I was able to remove the silver block by unbolting the two bolts and unhooking the lower lever/clip this is attached to the door handle wire, then the others just slip out of place, putting it back together was a bit of a jigsaw but as I had bought new door handle, lock, pin, silver lock, pump, all linkage arms and anything I may need I was able to recreationte it on the floor before refitting in my door. As I said a real easy fix once you figure it all out, if yours is the same problem you could probably get away with just replacing the lock on the side of the door as that's where the problem lies, if you need any guidance give us a shout.
