Quote:
Originally Posted by Micky
the kit fits on the master so it gets bleed at the same time
put brake fluid in the bottol and screw cap onto the master and the black air pipe goes to the tyre
 |
Right, what a day ive had.
I bought one, done exactly what is says in the instructions but the following happens:
If not enough fluid in the bottle then it runs low and just pushes through air
If too much fluid in the bottle it pisses out of the reservoir cap and once even popped the cap off the reservoir @ 20psi like suggested.
When the cap stayed on but was leaking slightly i couldnt get any fluid to come out of the nipples fast enough, very small dribbles.
Also - no resistance in the pedal and the calipers arnt clamping the discs
WTF!!! is going on.
cheers